Create and add a SKY13373 RF switch with corresponding symbol and footprint.

hardware/ctrl-mchip.sch

@@ -24,4 +24,15 @@ F 3 "https://ww1.microchip.com/downloads/en/DeviceDoc/SAMR34-R35-Low-Power-LoRa-
 	1    3950 3950
 	1    0    0    -1  
 $EndComp
+$Comp
+L Elabdev:SKY13373 U?
+U 1 1 5F54FC67
+P 7750 4850
+F 0 "U?" H 7750 5431 50  0000 C CNN
+F 1 "SKY13373" H 7750 5340 50  0000 C CNN
+F 2 "Elabdev:QFN-12-1EP_2x2mm_P0.5mm_EP0.76x0.76mm" H 7750 4350 50  0001 C CNN
+F 3 "http://www.skyworksinc.com/uploads/documents/SKY13373_460LF_201264N.pdf" H 7750 4250 50  0001 C CNN
+	1    7750 4850
+	1    0    0    -1  
+$EndComp
 $EndSCHEMATC

hardware/libraries/elabdev.dcm

@@ -6,6 +6,12 @@ K Atmel UHF Transceiver Microcontroller
 F https://ww1.microchip.com/downloads/en/DeviceDoc/SAMR34-R35-Low-Power-LoRa-Sub-GHz-SiP-Data-Sheet-DS70005356B.pdf
 $ENDCMP
 #
+$CMP SKY13373
+D SP3T DC-6.0GHz switch, 30dB isolation at 2.5GHz, QFN-12
+K RF SP3T switch CMOS
+F http://www.skyworksinc.com/uploads/documents/SKY13373_460LF_201264N.pdf
+$ENDCMP
+#
 $CMP ST25DV04K-JF
 D 13.56 MHz long-range interface dynamic NFC/RFID tag, Package: UFDFPN-8, EEPROM: 5 kb, Voltage: 1,8..5,5V, I/O pins: 8
 K ST25DV-I2C series Dynamic NFC Tag

hardware/libraries/elabdev.lib

@@ -80,6 +80,33 @@ X VBAT_DIG H8 400 1800 100 D 50 50 0 0 W
 ENDDRAW
 ENDDEF
 #
+# SKY13373
+#
+DEF SKY13373 U 0 40 Y Y 1 F N
+F0 "U" 450 350 50 H V C CNN
+F1 "SKY13373" -300 350 50 H V C CNN
+F2 "Elabdev:QFN-12-1EP_2x2mm_P0.5mm_EP0.76x0.76mm" 0 -500 50 H I C CNN
+F3 "" 0 -600 50 H I C CNN
+$FPLIST
+ QFN*1EP*2x2*P0.5mm*
+$ENDFPLIST
+DRAW
+S -500 300 500 -300 0 1 0 f
+X J1 1 600 100 100 L 50 50 0 0 P
+X GND 10 100 -400 100 U 50 50 0 0 w
+X RFC 11 -600 -150 100 R 50 50 0 0 P
+X GND 12 200 -400 100 U 50 50 0 0 w
+X GND 2 -200 -400 100 U 50 50 0 0 w
+X J3 3 600 -100 100 L 50 50 0 0 P
+X V1 4 -600 200 100 R 50 50 0 0 I
+X V2 5 -600 100 100 R 50 50 0 0 I
+X VDD 6 250 400 100 D 50 50 0 0 W
+X GND 7 -100 -400 100 U 50 50 0 0 w
+X GND 8 0 -400 100 U 50 50 0 0 w
+X J2 9 600 0 100 L 50 50 0 0 P
+ENDDRAW
+ENDDEF
+#
 # ST25DV04K-JF
 #
 DEF ST25DV04K-JF U 0 40 Y Y 1 F N
@@ -192,7 +219,7 @@ $FPLIST
 $ENDFPLIST
 DRAW
 S -200 200 200 -200 0 1 10 f
-P 9 0 1 0 -75 -25 -50 -25 -50 25 -25 25 -25 -25 0 -25  0 25 25 25 25 -25 N
+P 9 0 1 0 -75 -25 -50 -25 -50 25 -25 25 -25 -25 0 -25 0 25 25 25 25 -25 N
 X NC 1 -300 0 100 R 50 50 1 1 N N
 X GND 2 0 -300 100 U 50 50 1 1 W
 X OUT 3 300 0 100 L 50 50 1 1 O

hardware/modules/elabdev.pretty/QFN-12-1EP_2x2mm_P0.5mm_EP0.76x0.76mm.kicad_mod

@@ -0,0 +1,79 @@
+(module QFN-12-1EP_2x2mm_P0.5mm_EP0.76x0.76mm (layer F.Cu) (tedit 5F53B4D4)
+  (descr "QFN, 12 Pin, generated with kicad-footprint-generator ipc_dfn_qfn_generator.py")
+  (tags "QFN DFN_QFN")
+  (attr smd)
+  (fp_text reference REF** (at 0 -2.45) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text value QFN-12-1EP_2x2mm_P0.5mm_EP0.76x0.76mm (at 0 2.45) (layer F.Fab)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text user %R (at 0 -4) (layer F.Fab)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_line (start 0 -1) (end -1 0) (layer F.Fab) (width 0.15))
+  (fp_line (start -1 0) (end -1 1) (layer F.Fab) (width 0.15))
+  (fp_line (start -1 1) (end 1 1) (layer F.Fab) (width 0.15))
+  (fp_line (start 1 1) (end 1 -1) (layer F.Fab) (width 0.15))
+  (fp_line (start 1 -1) (end 0 -1) (layer F.Fab) (width 0.15))
+  (fp_line (start 1 -1.15) (end 1.15 -1.15) (layer F.SilkS) (width 0.12))
+  (fp_line (start 1.15 -1.15) (end 1.15 -1) (layer F.SilkS) (width 0.12))
+  (fp_line (start 1 1.15) (end 1.15 1.15) (layer F.SilkS) (width 0.12))
+  (fp_line (start 1.15 1.15) (end 1.15 1) (layer F.SilkS) (width 0.12))
+  (fp_line (start -1 1.15) (end -1.15 1.15) (layer F.SilkS) (width 0.12))
+  (fp_line (start -1.15 1.15) (end -1.15 1) (layer F.SilkS) (width 0.12))
+  (fp_line (start -1.45 -1.45) (end 1.45 -1.45) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 1.45 -1.45) (end 1.45 1.45) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 1.45 1.45) (end -1.45 1.45) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -1.45 1.45) (end -1.45 -1.45) (layer F.CrtYd) (width 0.05))
+  (fp_circle (center -1.5 -1.5) (end -1.35 -1.5) (layer F.SilkS) (width 0.3))
+  (pad 1 smd rect (at -0.93 -0.5 90) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -0.93 0 90) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at -0.93 0.5 90) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at -0.5 0.93) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 5 smd rect (at 0 0.93) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 6 smd rect (at 0.5 0.93) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 7 smd rect (at 0.93 0.5 90) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 8 smd rect (at 0.93 0 90) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 9 smd rect (at 0.93 -0.5 90) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 10 smd rect (at 0.5 -0.93) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 11 smd rect (at 0 -0.93) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 12 smd rect (at -0.5 -0.93) (size 0.2 0.44) (layers F.Cu F.Paste F.Mask))
+  (pad 13 smd rect (at -0.285 -0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.285 -0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.285 0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.285 0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.095 -0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.095 -0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.095 0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at -0.095 0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.095 -0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.095 -0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.095 0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.095 0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.285 -0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.285 -0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.285 0.095) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (pad 13 smd rect (at 0.285 0.285) (size 0.19 0.19) (layers F.Cu F.Paste F.Mask)
+    (solder_paste_margin -0.75))
+  (model ${KISYS3DMOD}/Package_DFN_QFN.3dshapes/QFN-12-1EP_3x3mm_P0.5mm_EP1.65x1.65mm.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.67 0.67 0.67))
+    (rotate (xyz 0 0 0))
+  )
+)