|
|
|
@@ -0,0 +1,94 @@ |
|
|
|
######################################################################## |
|
|
|
# EEPROM settings text file |
|
|
|
# |
|
|
|
# Edit this file for your particular board and run through eepmake tool, |
|
|
|
# then use eepflash tool to write to attached HAT ID EEPROM |
|
|
|
# |
|
|
|
# Tools available: |
|
|
|
# eepmake Parses EEPROM text file and creates binary .eep file |
|
|
|
# eepdump Dumps a binary .eep file as human readable text (for debug) |
|
|
|
# eepflash Write or read .eep binary image to/from HAT EEPROM |
|
|
|
# |
|
|
|
######################################################################## |
|
|
|
|
|
|
|
######################################################################## |
|
|
|
# Vendor info |
|
|
|
|
|
|
|
# 128 bit UUID. If left at zero eepmake tool will auto-generate |
|
|
|
# RFC 4122 compliant UUID |
|
|
|
product_uuid 00000000-0000-0000-0000-000000000000 |
|
|
|
|
|
|
|
# 16 bit product id |
|
|
|
product_id 0x0000 |
|
|
|
|
|
|
|
# 16 bit product version |
|
|
|
product_ver 0x0000 |
|
|
|
|
|
|
|
# ASCII vendor string (max 255 characters) |
|
|
|
vendor "ACME Technology Company" |
|
|
|
|
|
|
|
# ASCII product string (max 255 characters) |
|
|
|
product "Special Sensor Board" |
|
|
|
|
|
|
|
# Custom binary data |
|
|
|
custom_data |
|
|
|
c0ffee |
|
|
|
end |
|
|
|
|
|
|
|
######################################################################## |
|
|
|
# GPIO bank settings, set to nonzero to change from the default. |
|
|
|
# NOTE these setting can only be set per BANK, uncommenting any of |
|
|
|
# these will force the bank to use the custom setting. |
|
|
|
|
|
|
|
# drive strength, 0=default, 1-8=2,4,6,8,10,12,14,16mA, 9-15=reserved |
|
|
|
gpio_drive 0 |
|
|
|
|
|
|
|
# 0=default, 1=slew rate limiting, 2=no slew limiting, 3=reserved |
|
|
|
gpio_slew 0 |
|
|
|
|
|
|
|
# 0=default, 1=hysteresis disabled, 2=hysteresis enabled, 3=reserved |
|
|
|
gpio_hysteresis 0 |
|
|
|
|
|
|
|
# If board back-powers Pi via 5V GPIO header pins: |
|
|
|
# 0 = board does not back-power |
|
|
|
# 1 = board back-powers and can supply the Pi with a minimum of 1.3A |
|
|
|
# 2 = board back-powers and can supply the Pi with a minimum of 2A |
|
|
|
# 3 = reserved |
|
|
|
# If back_power=2 then USB high current mode will be automatically |
|
|
|
# enabled on the Pi |
|
|
|
back_power 0 |
|
|
|
|
|
|
|
######################################################################## |
|
|
|
# GPIO pins, uncomment for GPIOs used on board |
|
|
|
# Options for FUNCTION: INPUT, OUTPUT, ALT0-ALT5 |
|
|
|
# Options for PULL: DEFAULT, UP, DOWN, NONE |
|
|
|
# NB GPIO0 and GPIO1 are reserved for ID EEPROM so cannot be set |
|
|
|
|
|
|
|
# GPIO FUNCTION PULL |
|
|
|
# ---- -------- ---- |
|
|
|
#setgpio 2 INPUT DEFAULT |
|
|
|
#setgpio 3 INPUT DEFAULT |
|
|
|
#setgpio 4 INPUT DEFAULT |
|
|
|
#setgpio 5 INPUT DEFAULT |
|
|
|
#setgpio 6 INPUT DEFAULT |
|
|
|
#setgpio 7 INPUT DEFAULT |
|
|
|
#setgpio 8 INPUT DEFAULT |
|
|
|
#setgpio 9 INPUT DEFAULT |
|
|
|
#setgpio 10 INPUT DEFAULT |
|
|
|
#setgpio 11 INPUT DEFAULT |
|
|
|
#setgpio 12 INPUT DEFAULT |
|
|
|
#setgpio 13 INPUT DEFAULT |
|
|
|
#setgpio 14 INPUT DEFAULT |
|
|
|
#setgpio 15 INPUT DEFAULT |
|
|
|
#setgpio 16 INPUT DEFAULT |
|
|
|
#setgpio 17 INPUT DEFAULT |
|
|
|
#setgpio 18 INPUT DEFAULT |
|
|
|
#setgpio 19 INPUT DEFAULT |
|
|
|
#setgpio 20 INPUT DEFAULT |
|
|
|
#setgpio 21 INPUT DEFAULT |
|
|
|
#setgpio 22 INPUT DEFAULT |
|
|
|
#setgpio 23 INPUT DEFAULT |
|
|
|
#setgpio 24 INPUT DEFAULT |
|
|
|
#setgpio 25 INPUT DEFAULT |
|
|
|
#setgpio 26 INPUT DEFAULT |
|
|
|
#setgpio 27 INPUT DEFAULT |
