#159 D1 and D2 resistance levels are not balanced

已關閉
Michael Schloh von Bennewitz4 年之前建立 · 1 條評論

D1 and D2 resistance levels are not balanced

Problem environment

LED luminosity is partially determined by resistance to current, which can be balanced for a even appearance among diodes.

Steps to reproduce

  1. Refer to the schematic
  2. Cut the LED MCU pins
  3. Apply voltage across LEDs
  4. Compare luminosity

Expected result

All diodes appear to emit the same amount of luminosity.

Actual result

Some diodes are brighter than others, due to imbalanced resistance.

Severity level

This is low priority because existing design does not lead to burnt diodes.

# D1 and D2 resistance levels are not balanced ## Problem environment LED luminosity is partially determined by resistance to current, which can be balanced for a even appearance among diodes. ## Steps to reproduce 1. Refer to the schematic 1. Cut the LED MCU pins 1. Apply voltage across LEDs 1. Compare luminosity ## Expected result All diodes appear to emit the same amount of luminosity. ## Actual result Some diodes are brighter than others, due to imbalanced resistance. ## Severity level This is **low priority** because existing design does not lead to burnt diodes.
Michael Schloh von Bennewitz added the
enhancement
label 4 年之前
Michael Schloh von Bennewitz 新增至Layout design 里程碑 4 年之前
Michael Schloh von Bennewitz 4 年之前 修改了里程碑 Layout designFinal schematic and layout design

Solved by a2fe5b3.

Solved by a2fe5b3.
登入 才能加入這對話。
No Assignees
1 參與者
Due Date

No due date set.

Dependencies

This issue currently doesn't have any dependencies.

Loading…
取消
儲存
尚未有任何內容