PCB edge cuts follow the most recent official Raspberry Pi enclosure design, in that cutouts are made to accommodate top cover hinges.
Steps to reproduce
Refer to the layout
Locate the cutouts
Expected result
Cutouts allow placing and hinge operation of an official enclosure top cover.
Actual result
The cutouts are misplaced, poorly aligned, and too small.
Severity level
This is low priority because project requirements do not mandate mechanical engineering.
# Hinge cutout position and size are wrong
## Problem environment
PCB edge cuts follow the most recent official Raspberry Pi enclosure design, in that cutouts are made to accommodate top cover hinges.
## Steps to reproduce
1. Refer to the layout
1. Locate the cutouts
## Expected result
Cutouts allow placing and hinge operation of an official enclosure top cover.
## Actual result
The cutouts are misplaced, poorly aligned, and too small.
## Severity level
This is **low priority** because project requirements do not mandate mechanical engineering.
Hinge cutout position and size are wrong
Problem environment
PCB edge cuts follow the most recent official Raspberry Pi enclosure design, in that cutouts are made to accommodate top cover hinges.
Steps to reproduce
Expected result
Cutouts allow placing and hinge operation of an official enclosure top cover.
Actual result
The cutouts are misplaced, poorly aligned, and too small.
Severity level
This is low priority because project requirements do not mandate mechanical engineering.
Solved in
bb1358e.