#174 P2P application fails to print to serial console

Закрито
4 роки тому відкрито Michael Schloh von Bennewitz · 1 коментарів
Michael Schloh von Bennewitz прокоментував(ла) 4 роки тому

P2P application fails to print to serial console

Problem environment

The peer to peer (P2P) application sample illustrates the use of LoRa modulation in communications while requiring no gateway or IP connectivity.

Steps to reproduce

  1. Build firmware/SendcommPeer2P
  2. Program, start, and reset the MCU
  3. Observe output from the UART

Expected result

Informative text is printed to the serial console.

Actual result

No text is printed to the serial console.

Severity level

This is medium because project requirements state a set of sample firmware.

# P2P application fails to print to serial console ## Problem environment The peer to peer (P2P) application sample illustrates the use of LoRa modulation in communications while requiring no gateway or IP connectivity. ## Steps to reproduce 1. Build firmware/SendcommPeer2P 1. Program, start, and reset the MCU 1. Observe output from the UART ## Expected result Informative text is printed to the serial console. ## Actual result No text is printed to the serial console. ## Severity level This is **medium** because project requirements state a set of sample firmware.
Michael Schloh von Bennewitz додано
bug
мітку 4 роки тому
Michael Schloh von Bennewitz додав(ла) до Conditional integration of samples етапу 4 роки тому
Michael Schloh von Bennewitz прокоментував(ла) 4 роки тому
Власник

Solved in bb6402b.

Solved in bb6402b.
Підпишіться щоб приєднатися до обговорення.
Етап відсутній
Немає виконавеця
1 учасників
Дата завершення

Термін виконання не встановлений.

Залежності

Ця проблема в даний час не має залежностей.

Завантаження…
Відмінити
Зберегти
Тут ще немає жодного змісту.