# Align panel to Stencil8 ## Problem environment The fine pitch nature of 0,65mm BSC parts, BGA routing, and 3,5mil tracks requires increased accuracy even in hand built prototypes. Because the time needed to calibrate stretched stencils is not allowed, use the Stencil8 alignment system on all panels. ## Steps to reproduce 1. Search for corner panel mounts 2. Compare their diameter to 2,5mm 3. Compare their spacing to a 10mm grid ## Expected result Panel mounts should be compatible with Stencil8 calibration. ## Actual result Some holes are not spaced correctly. ## Severity level This is **medium priority** due to the potential difficulty of pasting prototypes in panels.

Resolved in f7c3988.