#128 USB bus power destroys MCU PA07

Geschlossen
vor 4 Jahren von Michael Schloh von Bennewitz geöffnet · 1 Kommentare

USB bus power destroys MCU PA07

Problem environment

The electrical area above the ball at F3 (bottom left corner corresponding with PA07) is smoke burned and destroyed when 5V bus power is present.

Steps to reproduce

  1. Observe the area above ball F3
  2. Insert a powered USB cable in J2

Expected result

Part of the MCU should not be destroyed when bus power is applied.

Actual result

Part of the MCU is destroyed and magic smoke escapes.

Workaround

Cut the trace from C5 to PA07.

Severity level

This is high priority because circuit damage is imminent.

# USB bus power destroys MCU PA07 ## Problem environment The electrical area above the ball at F3 (bottom left corner corresponding with PA07) is smoke burned and destroyed when 5V bus power is present. ## Steps to reproduce 1. Observe the area above ball F3 1. Insert a powered USB cable in J2 ## Expected result Part of the MCU should not be destroyed when bus power is applied. ## Actual result Part of the MCU is destroyed and magic smoke escapes. ## Workaround Cut the trace from C5 to PA07. ## Severity level This is **high priority** because circuit damage is imminent.
Michael Schloh von Bennewitz fügte das
bug
Label vor 4 Jahren hinzu
Michael Schloh von Bennewitz hat diesen Issue vor 4 Jahren zum Final schematic and layout design Meilenstein hinzugefügt
Michael Schloh von Bennewitz hat vor 4 Jahren kommentiert
Besitzer

Resolved by 95df659.

Resolved by 95df659.
Anmelden, um an der Diskussion teilzunehmen.
Niemand zuständig
1 Beteiligte
Fällig am

Kein Fälligkeitsdatum gesetzt.

Abhängigkeiten

Dieses Issue hat momentan keine Abhängigkeiten.

Laden…
Abbrechen
Speichern
Hier gibt es bis jetzt noch keinen Inhalt.