#128 USB bus power destroys MCU PA07

Chiuso
aperto 4 anni fa da Michael Schloh von Bennewitz · 1 commenti

USB bus power destroys MCU PA07

Problem environment

The electrical area above the ball at F3 (bottom left corner corresponding with PA07) is smoke burned and destroyed when 5V bus power is present.

Steps to reproduce

  1. Observe the area above ball F3
  2. Insert a powered USB cable in J2

Expected result

Part of the MCU should not be destroyed when bus power is applied.

Actual result

Part of the MCU is destroyed and magic smoke escapes.

Workaround

Cut the trace from C5 to PA07.

Severity level

This is high priority because circuit damage is imminent.

# USB bus power destroys MCU PA07 ## Problem environment The electrical area above the ball at F3 (bottom left corner corresponding with PA07) is smoke burned and destroyed when 5V bus power is present. ## Steps to reproduce 1. Observe the area above ball F3 1. Insert a powered USB cable in J2 ## Expected result Part of the MCU should not be destroyed when bus power is applied. ## Actual result Part of the MCU is destroyed and magic smoke escapes. ## Workaround Cut the trace from C5 to PA07. ## Severity level This is **high priority** because circuit damage is imminent.
Michael Schloh von Bennewitz added the
bug
label 4 anni fa
Michael Schloh von Bennewitz aggiunta alle pietre miliari Final schematic and layout design 4 anni fa
Michael Schloh von Bennewitz 4 anni fa ha commentato
Proprietario

Resolved by 95df659.

Resolved by 95df659.
Effettua l'accesso per partecipare alla conversazione.
No Assignees
1 Partecipanti
Data di scadenza

Nessuna data di scadenza impostata.

Dependencies

This issue currently doesn't have any dependencies.

Loading…
Annulla
Salva
Non ci sono ancora contenuti.