Three sizes of panel mounting holes are designed to fit a variety of stencil paste printers for manufacturing flexibility.
Steps to reproduce
Refer to the panel layout
Examin the mount NPTH holes
Expected result
Panel hole diameters should allow for 1.1mm, 2mm, 3mm, and 2.5mm mount sizes.
Actual result
Panel hole diameters are only 1.1mm, and 2.5mm large, with a few other nonstandard sizes represented as well.
Severity level
This is low priority because the existing 1,1mm diameter works well enough.
# Panel mounts are the wrong diameter
## Problem environment
Three sizes of panel mounting holes are designed to fit a variety of stencil paste printers for manufacturing flexibility.
## Steps to reproduce
1. Refer to the panel layout
1. Examin the mount NPTH holes
## Expected result
Panel hole diameters should allow for 1.1mm, 2mm, 3mm, and 2.5mm mount sizes.
## Actual result
Panel hole diameters are only 1.1mm, and 2.5mm large, with a few other nonstandard sizes represented as well.
## Severity level
This is **low priority** because the existing 1,1mm diameter works well enough.
Panel mounts are the wrong diameter
Problem environment
Three sizes of panel mounting holes are designed to fit a variety of stencil paste printers for manufacturing flexibility.
Steps to reproduce
Expected result
Panel hole diameters should allow for 1.1mm, 2mm, 3mm, and 2.5mm mount sizes.
Actual result
Panel hole diameters are only 1.1mm, and 2.5mm large, with a few other nonstandard sizes represented as well.
Severity level
This is low priority because the existing 1,1mm diameter works well enough.
Solved in
12d95a2.Corrected and solved again in
b810dbe.