Panel mounts are the wrong diameter

Problem environment

Three sizes of panel mounting holes are designed to fit a variety of stencil paste printers for manufacturing flexibility.

Steps to reproduce

1. Refer to the panel layout
2. Examin the mount NPTH holes

Expected result

Panel hole diameters should allow for 1.1mm, 2mm, 3mm, and 2.5mm mount sizes.

Actual result

Panel hole diameters are only 1.1mm, and 2.5mm large, with a few other nonstandard sizes represented as well.

Severity level

This is low priority because the existing 1,1mm diameter works well enough.

Solved in 12d95a2.

Corrected and solved again in b810dbe.