#61 Request a MCU design review

Fechado
aberto por Michael Schloh von Bennewitz 4 anos atrás · 1 comentários

Request a MCU design review

Problem environment

Electronics manufacturers offer design review services, which can be taken advantage of in order to increase quality.

Steps to reproduce

  1. Log in to Microchip support account
  2. Create a request type Value Added Services
  3. Select a review type MCU32Check Review

Expected result

A Microchip engineer delivers review information after 12-15 days.

Workaround

Follow the suggested steps on the manufacturer website titled Ready to get started?

Severity level

This is low priority because we expect a rejection due to our choice of Opensource tooling.

# Request a MCU design review ## Problem environment Electronics manufacturers offer design review services, which can be taken advantage of in order to increase quality. ## Steps to reproduce 1. Log in to Microchip support account 2. Create a request type *Value Added Services* 3. Select a review type *MCU32Check Review* ## Expected result A Microchip engineer delivers review information after 12-15 days. ## Workaround Follow the [suggested steps](https://www.microchip.com/en-us/support/design-help/design-check-services/) on the manufacturer website titled **Ready to get started?** ## Severity level This is **low priority** because we expect a rejection due to our choice of Opensource tooling.
Michael Schloh von Bennewitz adicionou a etiqueta
question
4 anos atrás
Michael Schloh von Bennewitz adicionou a etiqueta
help wanted
4 anos atrás
Michael Schloh von Bennewitz adicionou esta issue para o marco Renewed dialog with vendors 4 anos atrás

The design review yielded suggestions that are partly implemented in 1c8ea48. The flaws found (for example USB differential data pairs, avoiding vias in RF, or balancing impedence and maintaining fifty ohm loads) are too severe to implement.

The design review yielded suggestions that are partly implemented in 1c8ea48. The flaws found (for example USB differential data pairs, avoiding vias in RF, or balancing impedence and maintaining fifty ohm loads) are too severe to implement.
Acesse para participar desta conversação.
Sem responsável
1 participante(s)
Data limite

Data limite não informada.

Dependências

Esta issue atualmente não tem dependências.

Carregando…
Cancelar
Salvar
Ainda não há conteúdo.