#69 Create a test jig

Ouvert
créé il y a 4 ans par Michael Schloh von Bennewitz · 2 commentaires

Create a test jig

Problem environment

Test jigs such as the one described by document SCH_14-A21043-03 automate hardware assurance.

Expected result

A full featured test jig exists.

Actual result

No test jig exists.

Resources

https://www.raspberrypi.org/documentation/hardware/computemodule/designfiles.md

Severity level

This is low priority because project requirements do not mandate a test jig.

# Create a test jig ## Problem environment Test jigs such as the one described by document *SCH_14-A21043-03* automate hardware assurance. ## Expected result A full featured test jig exists. ## Actual result No test jig exists. ## Resources https://www.raspberrypi.org/documentation/hardware/computemodule/designfiles.md ## Severity level This is **low priority** because project requirements do not mandate a test jig.
Michael Schloh von Bennewitz a ajouté l'étiquette
wontfix
il y a 4 ans
Michael Schloh von Bennewitz a ajouté l'étiquette
enhancement
il y a 4 ans
Michael Schloh von Bennewitz a ajouté cela au jalon Postproject catchall il y a 4 ans
Michael Schloh von Bennewitz a commenté il y a 4 ans
Propriétaire

The jig shown in SCH_14-A21043-03 looks great, but probably takes a year to complete. It is out of the scope of this project, so close this report.

The jig shown in *SCH_14-A21043-03* looks great, but probably takes a year to complete. It is out of the scope of this project, so close this report.
Michael Schloh von Bennewitz a commenté il y a 4 ans
Propriétaire

Reopen following d8106eb to allow limited (EEPROM and MCU flash) operation when testing.

Reopen following d8106eb to allow limited (EEPROM and MCU flash) operation when testing.
Connectez-vous pour rejoindre cette conversation.
Pas d'assignataires
1 participants
Échéance

Aucune échéance n'a été définie.

Dépendances

Ce ticket n'a actuellement pas de dépendance.

Chargement…
Annuler
Enregistrer
Il n'existe pas encore de contenu.