This is low priority because project requirements do not mandate a test jig.
# Create a test jig
## Problem environment
Test jigs such as the one described by document *SCH_14-A21043-03* automate hardware assurance.
## Expected result
A full featured test jig exists.
## Actual result
No test jig exists.
## Resources
https://www.raspberrypi.org/documentation/hardware/computemodule/designfiles.md
## Severity level
This is **low priority** because project requirements do not mandate a test jig.
Create a test jig
Problem environment
Test jigs such as the one described by document SCH_14-A21043-03 automate hardware assurance.
Expected result
A full featured test jig exists.
Actual result
No test jig exists.
Resources
https://www.raspberrypi.org/documentation/hardware/computemodule/designfiles.md
Severity level
This is low priority because project requirements do not mandate a test jig.
The jig shown in SCH_14-A21043-03 looks great, but probably takes a year to complete. It is out of the scope of this project, so close this report.
Reopen following
d8106ebto allow limited (EEPROM and MCU flash) operation when testing.