#78 Replace yellow D2 with red colour

Zamknięty
otworzone 4 lat temu przez Michael Schloh von Bennewitz · 1 komentarzy

Replace yellow D2 with red colour

Problem environment

The choice of colours in light emitting diodes allows for good recognition of runtime states.

Steps to reproduce

  1. Observe LEDs in design
  2. Leave the green colour
  3. Replace the yellow with red

Expected result

D2 is specified as a red diode.

Actual result

D2 is specified as a yellow diode.

Severity level

This is medium priority because runtime benefits with little extra effort.

# Replace yellow D2 with red colour ## Problem environment The choice of colours in light emitting diodes allows for good recognition of runtime states. ## Steps to reproduce 1. Observe LEDs in design 1. Leave the green colour 1. Replace the yellow with red ## Expected result D2 is specified as a red diode. ## Actual result D2 is specified as a yellow diode. ## Severity level This is **medium priority** because runtime benefits with little extra effort.
Michael Schloh von Bennewitz dodano etykietę
enhancement
4 lat temu
Michael Schloh von Bennewitz dodaje to do kamienia milowego Final schematic and layout design 4 lat temu
Michael Schloh von Bennewitz skomentował(-a) 4 lat temu
Właściciel

The LED choice has stabilised, with green indicating power, red indicating radio operation, and yellow indicating a user function.

The LED choice has stabilised, with green indicating power, red indicating radio operation, and yellow indicating a user function.
Zaloguj się, aby dołączyć do tej rozmowy.
Brak kamienia milowego
Brak przypisanych
Uczestnicy 1
Termin realizacji

Brak ustawionego terminu realizacji.

Blokuje
#79 Resolve LED intensity consistency
NLNetfound/dsendcomm
Ładowanie…
Anuluj
Zapisz
Nie ma jeszcze treści.