#78 Replace yellow D2 with red colour

Закрито
4 роки тому відкрито Michael Schloh von Bennewitz · 1 коментарів
Michael Schloh von Bennewitz прокоментував(ла) 4 роки тому

Replace yellow D2 with red colour

Problem environment

The choice of colours in light emitting diodes allows for good recognition of runtime states.

Steps to reproduce

  1. Observe LEDs in design
  2. Leave the green colour
  3. Replace the yellow with red

Expected result

D2 is specified as a red diode.

Actual result

D2 is specified as a yellow diode.

Severity level

This is medium priority because runtime benefits with little extra effort.

# Replace yellow D2 with red colour ## Problem environment The choice of colours in light emitting diodes allows for good recognition of runtime states. ## Steps to reproduce 1. Observe LEDs in design 1. Leave the green colour 1. Replace the yellow with red ## Expected result D2 is specified as a red diode. ## Actual result D2 is specified as a yellow diode. ## Severity level This is **medium priority** because runtime benefits with little extra effort.
Michael Schloh von Bennewitz додано
enhancement
мітку 4 роки тому
Michael Schloh von Bennewitz додав(ла) до Final schematic and layout design етапу 4 роки тому
0%!<(string=/michael)/div>[2]s додано нову залежність 4 роки тому'
Michael Schloh von Bennewitz прокоментував(ла) 4 роки тому
Власник

The LED choice has stabilised, with green indicating power, red indicating radio operation, and yellow indicating a user function.

The LED choice has stabilised, with green indicating power, red indicating radio operation, and yellow indicating a user function.
Підпишіться щоб приєднатися до обговорення.
Етап відсутній
Немає виконавеця
1 учасників
Дата завершення

Термін виконання не встановлений.

Блоки
#79 Resolve LED intensity consistency
NLNetfound/dsendcomm
Завантаження…
Відмінити
Зберегти
Тут ще немає жодного змісту.