# The LDO at U2 is the wrong footprint ## Problem environment The low dropout voltage regulator for USB bus power according to the bill of materials must fit the layout footprint. ## Steps to reproduce 1. Reference the parts list and layout 1. Examine the LDO with designator U2 1. Compare the size and footprint ## Expected result The size and footprint of the part specified by the bill of materials is consistent with the layout design. ## Actual result The layout design indicates a different footprint than the bill of materials specifies. ## Workaround A nasty hand soldered fine pitch effort is possible if a high quality microscope and solder station is used. Solder the terminals of the LDO by hand. ## Severity level This is **low priority** because project requirements imply no support for serial interfaces, except for UART/RS232 needed for host communication.

Resolved by 7c2b89e.