240 커밋 (12b319a7de476b7df38d71c427cb5923bf854908)
 

작성자 SHA1 메시지 날짜
  Michael Schloh von Bennewitz 12b319a7de Resolve #167 by including a EEPROM device tree entry for J3 pin 37. 4 년 전
  Michael Schloh von Bennewitz 7e14a124e6 Include useful information relating to the temporary nature of paperclips. 4 년 전
  Michael Schloh von Bennewitz e15611b3a7 Correct URL of the chip antenna to change sources due to inavailability. 4 년 전
  Michael Schloh von Bennewitz 1dc2ba4803 Add a portable document formatted generated bill archive for hard copy. 4 년 전
  Michael Schloh von Bennewitz 35c3f2f83d Include the approximate revision number and rearrange header and footer. 4 년 전
  Michael Schloh von Bennewitz c54941d649 Improve wording and allow cell span binding to view legend in foot row. 4 년 전
  Michael Schloh von Bennewitz 0848ee3d5d Generate and annotate a new structured spreadsheet for the CSV source. 4 년 전
  Michael Schloh von Bennewitz f36857e49e Reverse UFL and try to finish chip antenna and 50 ohm feed line traces. 4 년 전
  Michael Schloh von Bennewitz 65aca19040 Add missing entry of a Samtec FTSH THT connector for the J20 SWD footprint. 4 년 전
  Michael Schloh von Bennewitz d8d2d02ef2 Correct missing entry for line number two, by renumbering lines. 4 년 전
  Michael Schloh von Bennewitz 80951d020f Integrate manufacturer advice from Johanson on AE5 corner placement. 4 년 전
  Michael Schloh von Bennewitz c6ed8ea5c8 Reposition chip antenna to improve return loss at the target frequency. 4 년 전
  Michael Schloh von Bennewitz 21a5e8909f Correct recent tolerance configuration with redundant via diamters. 4 년 전
  Michael Schloh von Bennewitz 95308f748c Set default track width, spacing, via size, and hole diameters suitably. 4 년 전
  Michael Schloh von Bennewitz dce2fa31e9 Correct syntax errors, replace false identifiers, and remove unpopulations. 4 년 전
  Michael Schloh von Bennewitz 1f3a516c01 Correct syntax error in parts list to avoid parsing errors. 4 년 전
  Michael Schloh von Bennewitz 75ae0e50b3 Renumber tape feeder positions according to switch resistor consolidation. 4 년 전
  Michael Schloh von Bennewitz 670ea5ea44 Try a risky consolidation of switch circuits from 39 ohm series to 220. 4 년 전
  Michael Schloh von Bennewitz 69e759d47c Renumber tape feeder position to correspond with #164 consolidation work. 4 년 전
  Michael Schloh von Bennewitz 7d374fafcc Try to reach magic number of fourty seven tape feeders by consolidation. 4 년 전
  Michael Schloh von Bennewitz 812a589f28 Regenerate schematic designs for use in RF analysis and consultation. 4 년 전
  Michael Schloh von Bennewitz ca4f317856 Update the automated placement configuration accordingly. 4 년 전
  Michael Schloh von Bennewitz fb71af7c10 Resolve #160 by laboriously rerouting test point trace to an unsused pin. 4 년 전
  Michael Schloh von Bennewitz 55b36219e6 Improve to partially accommodate #147 bus power to backpower a host. 4 년 전
  Michael Schloh von Bennewitz 47cf21d85a Resolve #164 by consolidating most parts in the comment suggestion. 4 년 전
  Michael Schloh von Bennewitz 731c5e9822 Correct load capacitor values for LSE and modify HSE on assumptions. 4 년 전
  Michael Schloh von Bennewitz bbe2fa3ba0 Track feeder areas in use to contrast with DNP or derivative models. 4 년 전
  Michael Schloh von Bennewitz 33ff35773c Begin process of reducing unique part count by DNP identifying 0R. 4 년 전
  Michael Schloh von Bennewitz c965b8a3f8 Adjust schematic labels, relabel D8 designator to D3, and regenerate layout. 4 년 전
  Michael Schloh von Bennewitz bb1358e0cd Try to resolve #161 and #162 mechanical engineering problems. 4 년 전
  Michael Schloh von Bennewitz 9983967507 Add a specifications based representation of a J-Link mini device. 4 년 전
  Michael Schloh von Bennewitz 59b01f1a56 Resolve 155 by adding minimal but important extra notation for alternates. 4 년 전
  Michael Schloh von Bennewitz a137ed3acd Modify parts list according to recent diode and resistance corrections. 4 년 전
  Michael Schloh von Bennewitz b810dbe634 Resolve #154 again by correcting the 2mm and 1,6mm mounting holes to 1,8mm. 4 년 전
  Michael Schloh von Bennewitz a2fe5b3342 Resolve #158 and #159 by balancing resistance values of light diodes. 4 년 전
  Michael Schloh von Bennewitz 7d6f26ec2c Improve placement of ground indicator symbol in the bottom silkscreen. 4 년 전
  Michael Schloh von Bennewitz 12d95a2a2f Add a provisional (used in panelisation) frame design and solve #154. 4 년 전
  Michael Schloh von Bennewitz 72d65899a0 Solve automation vision errors #145 by positioning and removing fiducials. 4 년 전
  Michael Schloh von Bennewitz e64c25bb4e Integrate new reset host interface, documented in #153 and 08e3618. 4 년 전
  Michael Schloh von Bennewitz 08e361811f Route reset signal from controller chip to host, solving #153. 4 년 전
  Michael Schloh von Bennewitz e6845790e5 Remove partless entries corresponding with solder jumpers and annotate. 4 년 전
  Michael Schloh von Bennewitz 062c71befc Add a openocd(1) configuration, to enable user firmware programming. 4 년 전
  Michael Schloh von Bennewitz 84c7614e99 Hack the horizontal J4 UART connector notation to accommodate an edge. 4 년 전
  Michael Schloh von Bennewitz f790aa3252 Reposition fiducials according to automation test results, and add FID6. 4 년 전
  Michael Schloh von Bennewitz 7f64df9903 Improve notations of programming connector headers avoiding JTAG. 4 년 전
  Michael Schloh von Bennewitz 8c965b9b90 Modify tape feeder pick configuration to improve handling of parts. 4 년 전
  Michael Schloh von Bennewitz 7af8ba97f5 Improve fiducial size, form, placement, and structure to resolve #145. 4 년 전
  Michael Schloh von Bennewitz eb74067f05 Add test points for USB data quality assurance (especially type C.) 4 년 전
  Michael Schloh von Bennewitz a2e76541c1 Remove MPLab Snap because it fails on all Opensource (GDB) applications. 4 년 전
  Michael Schloh von Bennewitz c7e1804622 Add MPLab Snap and STLink V3Mini devices as candidate programmers. 4 년 전