 Michael Schloh von Bennewitz
|
47cf21d85a
|
Resolve #164 by consolidating most parts in the comment suggestion.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
731c5e9822
|
Correct load capacitor values for LSE and modify HSE on assumptions.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
33ff35773c
|
Begin process of reducing unique part count by DNP identifying 0R.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
c965b8a3f8
|
Adjust schematic labels, relabel D8 designator to D3, and regenerate layout.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
bb1358e0cd
|
Try to resolve #161 and #162 mechanical engineering problems.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
59b01f1a56
|
Resolve 155 by adding minimal but important extra notation for alternates.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
a2fe5b3342
|
Resolve #158 and #159 by balancing resistance values of light diodes.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
7d6f26ec2c
|
Improve placement of ground indicator symbol in the bottom silkscreen.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
72d65899a0
|
Solve automation vision errors #145 by positioning and removing fiducials.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
08e361811f
|
Route reset signal from controller chip to host, solving #153.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
84c7614e99
|
Hack the horizontal J4 UART connector notation to accommodate an edge.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
f790aa3252
|
Reposition fiducials according to automation test results, and add FID6.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
7f64df9903
|
Improve notations of programming connector headers avoiding JTAG.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
7af8ba97f5
|
Improve fiducial size, form, placement, and structure to resolve #145.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
eb74067f05
|
Add test points for USB data quality assurance (especially type C.)
|
4 年前 |
|
Michael Schloh von Bennewitz
|
d6f0deb432
|
Increase track widths and reduce (sloppy) vias in RF paths to antennas.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
02bbb27912
|
Remove paste from unpopulated chip antenna passive pads and clarify.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
d8106ebb3a
|
Add structures and circuits to support forthcoming test jig construction.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
5a29587d8e
|
Work on #141 by integrating pi networks to match impedence in antennas.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
dfae2135e6
|
Adjust label spacing slightly on designator text in the silkscreen.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
c80ec05067
|
Correct electronic design rules check results pending imminent release.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
035f934f79
|
Repour lost filled areas on all layers, forgotten in last commit.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
e71589f739
|
Reshape and position the hack that silkscreen indicator bar.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
f143228cb3
|
Selectively remove paste apertures and replace hole cuts with drills.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
9702fcfc69
|
Improve name text of artist signature which was too long before.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
9f370cd029
|
Annotate J5 and J20 according to their serial protocols in silkscreens.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
3dfc431d97
|
Mark the first JTAG SWD debug interface connector in the silkscreen.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
f2ad7f7ead
|
Remove stray user drawing layer of a edge cut guidance horizontal bar.
|
4 年前 |
 Michael Schloh von Bennewitz
|
f4a7a6cc9f
|
Bump version numbers pending panelisation and prepare to manufacture.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
4f3db6f44a
|
Correct USB bus power circuit according to reference design and adjust.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
8eebf51cfb
|
Adjust position of external display connection cutout on board bottom.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
6040ddcdfa
|
Add holes for hackfield, antenna legend, and correct enclosure hinges.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
5bf1b6c077
|
Refine calibration suggestion from 12pF to 15pF indicated by counter.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
98b1e69d93
|
Correct version number as indicated in silkscreen text.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
1c8ea4862a
|
Implement design review suggestions to resolve #61 and #62.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
73a6ed98bc
|
Add a test point to allow LSE crystal output redirection to a MCU pin.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
95df65933d
|
Resolve #128 by rerouting bus power to PA07 F3 to bus test circuit.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
799c6fe772
|
Calibrate crystal circuits by trial and error pending spectrum analysis.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
1f2fe604d8
|
Connect pads from pogo pin test matrix to GND and 3V3 to future proof.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
afa5216e09
|
Resolve #122 by removing AE7 and JP10 from the layout, and add a PWR LED.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
d772d2f788
|
Resolve #83 after tests indicate MLS correctly supplies power from PA09.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
a6fcbdf613
|
Resolve bug report #118 by replacing 10pF with 7pF load capacitors.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
89c95b975f
|
Bump hardware revision number pending tag for design review.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
8c114dd4b4
|
Correct optional PA14_XIN and PA15_XOUT external crystal floating pins.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
52eec91b20
|
Correct HSE circuit and remove JP26, add RFSW testpoints and text.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
7c358ddd46
|
Resolve #114 by replacing flawed 27 pF value with 2,7 pF throughout.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
819a415fc9
|
Modify deprecated secure element model to new ATECC608B throughout.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
f6764b5d5e
|
Add top layer test points to connect with bottom layer solder grid.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
b969424881
|
Resolve #104 by removing unconnected vias from AE5 pad 1.
|
4 年前 |
|
Michael Schloh von Bennewitz
|
6697d42f59
|
Correct misplaced designator text label rotated in the last commit.
|
5 年前 |
