 Michael Schloh von Bennewitz
|
ef09d61643
|
Replace 1K value with 2K4 for R40 to dim power indicator LED D3.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
66cc2e4438
|
Remove paste on DNP R41, backout 8819d77 15/18pF, and correct placements.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
8819d778aa
|
Resolve #123 by replacing C94 and C95 values with 18pF following analysis.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
bd529efcb4
|
Modify and consolidate both ferrite beads according to manufacturer advice.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
659c316ae0
|
Bump revision numbers, dates, and copyright pending release to manufacturing.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
670ea5ea44
|
Try a risky consolidation of switch circuits from 39 ohm series to 220.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
7d374fafcc
|
Try to reach magic number of fourty seven tape feeders by consolidation.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
fb71af7c10
|
Resolve #160 by laboriously rerouting test point trace to an unsused pin.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
55b36219e6
|
Improve to partially accommodate #147 bus power to backpower a host.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
47cf21d85a
|
Resolve #164 by consolidating most parts in the comment suggestion.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
731c5e9822
|
Correct load capacitor values for LSE and modify HSE on assumptions.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
33ff35773c
|
Begin process of reducing unique part count by DNP identifying 0R.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
c965b8a3f8
|
Adjust schematic labels, relabel D8 designator to D3, and regenerate layout.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
a2fe5b3342
|
Resolve #158 and #159 by balancing resistance values of light diodes.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
08e361811f
|
Route reset signal from controller chip to host, solving #153.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
f790aa3252
|
Reposition fiducials according to automation test results, and add FID6.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
7af8ba97f5
|
Improve fiducial size, form, placement, and structure to resolve #145.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
eb74067f05
|
Add test points for USB data quality assurance (especially type C.)
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
d8106ebb3a
|
Add structures and circuits to support forthcoming test jig construction.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
5a29587d8e
|
Work on #141 by integrating pi networks to match impedence in antennas.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
f143228cb3
|
Selectively remove paste apertures and replace hole cuts with drills.
|
4 лет назад |
 Michael Schloh von Bennewitz
|
f4a7a6cc9f
|
Bump version numbers pending panelisation and prepare to manufacture.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
4f3db6f44a
|
Correct USB bus power circuit according to reference design and adjust.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
6040ddcdfa
|
Add holes for hackfield, antenna legend, and correct enclosure hinges.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
5bf1b6c077
|
Refine calibration suggestion from 12pF to 15pF indicated by counter.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
1c8ea4862a
|
Implement design review suggestions to resolve #61 and #62.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
73a6ed98bc
|
Add a test point to allow LSE crystal output redirection to a MCU pin.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
95df65933d
|
Resolve #128 by rerouting bus power to PA07 F3 to bus test circuit.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
799c6fe772
|
Calibrate crystal circuits by trial and error pending spectrum analysis.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
1f2fe604d8
|
Connect pads from pogo pin test matrix to GND and 3V3 to future proof.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
afa5216e09
|
Resolve #122 by removing AE7 and JP10 from the layout, and add a PWR LED.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
d772d2f788
|
Resolve #83 after tests indicate MLS correctly supplies power from PA09.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
a6fcbdf613
|
Resolve bug report #118 by replacing 10pF with 7pF load capacitors.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
89c95b975f
|
Bump hardware revision number pending tag for design review.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
8c114dd4b4
|
Correct optional PA14_XIN and PA15_XOUT external crystal floating pins.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
52eec91b20
|
Correct HSE circuit and remove JP26, add RFSW testpoints and text.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
7c358ddd46
|
Resolve #114 by replacing flawed 27 pF value with 2,7 pF throughout.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
819a415fc9
|
Modify deprecated secure element model to new ATECC608B throughout.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
f6764b5d5e
|
Add top layer test points to connect with bottom layer solder grid.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
40a2b218fe
|
Redevelop, correct corners, and add connections to format variants.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
62e6e0b06b
|
Regenerate and commit the netlist reflecting the power flag addition.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
7c2b89e222
|
Correct flawed U2 package size and bump revision pending release.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
55a0f50266
|
Resolve #71 by replacing the 0402 part with a same brand 0805 part.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
7da0bfb1b5
|
Connect spring contacts for daughterboard and add jumper to resolve #88.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
b4f491a6d1
|
Add a ambient light sensor circuit and route to the MCU.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
06ee3e4234
|
Resolve #80 and #89 by adding a 1 uF decoupling capacitor and connector.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
787e5fed89
|
Resolve #76 by replacing triangle solder jumper shapes with ovals.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
7e32c82a2f
|
Resolve #75 by replacing header pin footprints with solder jumpers.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
8e36a89bf0
|
Resolve #72 and #74 by rerouting traces, jumpers, and pads.
|
4 лет назад |
|
Michael Schloh von Bennewitz
|
d1de14d468
|
Resolve #81 and #82 by replacing oscillator circuit and inductors.
|
4 лет назад |
