 Michael Schloh von Bennewitz
|
52eec91b20
|
Correct HSE circuit and remove JP26, add RFSW testpoints and text.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
7c358ddd46
|
Resolve #114 by replacing flawed 27 pF value with 2,7 pF throughout.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
819a415fc9
|
Modify deprecated secure element model to new ATECC608B throughout.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
f6764b5d5e
|
Add top layer test points to connect with bottom layer solder grid.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
b969424881
|
Resolve #104 by removing unconnected vias from AE5 pad 1.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
6697d42f59
|
Correct misplaced designator text label rotated in the last commit.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
9a29ebfc09
|
Resolve #97 by redesigning the QFN-12 footprint used for the U4 RF switch.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
a2b385851b
|
Add handwritten signature decorative text to bottom silkscreen.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
b727e44ef5
|
Resolve DRC errors and panelise irregular tabs for consistency.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
73d2e45c06
|
Improve continuity of the ground plane of the top layer by adding a via.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
7c2b89e222
|
Correct flawed U2 package size and bump revision pending release.
|
4 yıl önce |
 Michael Schloh von Bennewitz
|
3c10b0797f
|
Modify placement of J1 battery power selection jumper to improve access.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
a66f58cfd3
|
Align placement of resistor at R3 to the existing resistor at R2.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
55a0f50266
|
Resolve #71 by replacing the 0402 part with a same brand 0805 part.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
0d38f32cf8
|
Reduce length of antenna selection jumper traces to improve signal.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
6969e8e3f0
|
Complete partially implemented RF switch power selection jumper.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
7da0bfb1b5
|
Connect spring contacts for daughterboard and add jumper to resolve #88.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
b4f491a6d1
|
Add a ambient light sensor circuit and route to the MCU.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
06ee3e4234
|
Resolve #80 and #89 by adding a 1 uF decoupling capacitor and connector.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
787e5fed89
|
Resolve #76 by replacing triangle solder jumper shapes with ovals.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
7e32c82a2f
|
Resolve #75 by replacing header pin footprints with solder jumpers.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
8e36a89bf0
|
Resolve #72 and #74 by rerouting traces, jumpers, and pads.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
5547c5c17c
|
Correct bottom ground plane cohesion across island regions.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
d1de14d468
|
Resolve #81 and #82 by replacing oscillator circuit and inductors.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
be68447c46
|
Improve position of bottom layer silkscreen text for designators.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
7e9d77859b
|
Bump version number pending layout engineering of STM32WL SiP migration.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
e1e0f5c1d5
|
Redesign for STM32WL SoC architecture, add features, and bump version.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
cff212170b
|
Add a paste layer to NPTH mounts to configure for foil apertures.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
5da94c3830
|
Include a solderfield breadboard to support daughterboard development.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
c0aa16f26e
|
Resolve #35 add a board to board connector to prepare daughterboards.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
f7c398852a
|
Resolve #33 Align panel to Stencil8 by relocating mount holes slightly.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
d07d09c41a
|
Increase parts count to 124, and connect all remaining circuits.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
772f799d43
|
Connect power voltage and ground to bottom quarter of board parts.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
b7623201ba
|
Dump layout regeneration after trying to design new test points.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
4a6fe14ba6
|
Apply copper pours to all layers with ground nets except on layer 3.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
dc6f024b36
|
Remove pad to pad spacing tolerance error to almost completely correct.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
4a041e91f9
|
Clean up vias, tracks, spacing, and remove redundant segments.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
fe06fd495f
|
Adjust track width, via drills, and annular rings to minimum specs.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
50ca6fbb0b
|
Connect remaining USB data and UART data circuits for input output.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
dca0d14ff0
|
Correct flawed net in cross connected serial wire debug contacts.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
7cadc14d8f
|
Connect both LEDs to MCU pins for controlling user output.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
b639be76b3
|
Complete draft revision of the radio frequency switch circuit.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
2063328cb1
|
Remove useless chip antenna which takes up more area than total size.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
b1fa69de4a
|
Replace coin cell battery holder and move crystal to make room.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
6daad3ba72
|
Complete most circuits pending layout of RF switch and passive arrays.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
53362e2b0c
|
Upload intermediate layout design with most decapsulation circuits.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
802ec1d175
|
Reflect corrections in power circuits and generally develop layout.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
36323d05c0
|
Improve tab text and position of mouse bites pending part placements.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
0d1eed7fcb
|
Reduce and (prototype) panelise for format change from badge to hat.
|
4 yıl önce |
|
Michael Schloh von Bennewitz
|
a2807cc2b2
|
Correct title text delimiters in the project layout file.
|
4 yıl önce |
