 Michael Schloh von Bennewitz
|
d07d09c41a
|
Increase parts count to 124, and connect all remaining circuits.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
15d9f44faf
|
Regenerate the netlist after introducing solder jumpers for antennas.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
b657eb2ec5
|
Add solder switch symbols for use in new antenna decoupling from switch.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
7229a08eed
|
Add solder jumpers to decouple antenna array from transceiver switch.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
772f799d43
|
Connect power voltage and ground to bottom quarter of board parts.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
b7623201ba
|
Dump layout regeneration after trying to design new test points.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
2fa32f80c2
|
Add test points to allow flexible postassembly prototype debugging.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
4a6fe14ba6
|
Apply copper pours to all layers with ground nets except on layer 3.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
2aa746b314
|
Add logos to schematic, that unfortunately do not fit in the layout.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
dc6f024b36
|
Remove pad to pad spacing tolerance error to almost completely correct.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
4a041e91f9
|
Clean up vias, tracks, spacing, and remove redundant segments.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
fe06fd495f
|
Adjust track width, via drills, and annular rings to minimum specs.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
50ca6fbb0b
|
Connect remaining USB data and UART data circuits for input output.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
dca0d14ff0
|
Correct flawed net in cross connected serial wire debug contacts.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
7cadc14d8f
|
Connect both LEDs to MCU pins for controlling user output.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
b639be76b3
|
Complete draft revision of the radio frequency switch circuit.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
2063328cb1
|
Remove useless chip antenna which takes up more area than total size.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
b1fa69de4a
|
Replace coin cell battery holder and move crystal to make room.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
6daad3ba72
|
Complete most circuits pending layout of RF switch and passive arrays.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
53362e2b0c
|
Upload intermediate layout design with most decapsulation circuits.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
8d28560c4e
|
Tighten tolerances to highest four layer ENIG cheap fabrication capacity.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
7519f8f491
|
Adjust ball pad clearance and solder mask aperature to allow sanity.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
802ec1d175
|
Reflect corrections in power circuits and generally develop layout.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
cc5a03834a
|
Correct power circuit in LED parts that require a power flag.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
636ecc14e6
|
Correct flawed ground short in secure element authentication circuit.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
8da9ab17c4
|
Correct electrical connection to chip and loop antenna symbol.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
eedb5cdd42
|
Improve mounting hole unit numbering by hand modifying identifiers.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
2efab65f8a
|
Add nested part to allow either DFN or SOIC secure elements to be used.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
9364408811
|
Correct footprint for Atmel secure element to comply with standards.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
36323d05c0
|
Improve tab text and position of mouse bites pending part placements.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
0d1eed7fcb
|
Reduce and (prototype) panelise for format change from badge to hat.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
57d2b72b53
|
Add test point loops and correct sized mounting holes.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
2a1cbb6ddb
|
Add nested part to allow either DFN or SOIC EEPROMs to be used.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
b4e7cd354f
|
Merge branch 'master' of git.europalab.com:NLNetfound/dsendcomm
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
f779b7999a
|
Adapt layers and tolerances to correspond with four layer qualities.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
aea4480af7
|
Hide copper antenna surface underneath soldermask instead of plating it.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
69acaf3e33
|
Add EEPROM, jumpers, and connector pending migration to hat format.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
9bfa087f15
|
Add an explanation about why the project lacks software.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
f562757082
|
Initialise a explanation for the lack of project software.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
54e8c2e73c
|
Correct schematics after electric rules check results in warnings.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
0b9e714c81
|
Update library cache to most recent changes and add forgotten netlist.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
a88a134751
|
Update existing schematics after modification and subsequent reannotation.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
37dbf8f109
|
Adequately improve and clarify power circuit design for bug #12.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
fc60477441
|
Correct poor abstraction bug #4 and generally complete Microchip circuits.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
33e82abaa5
|
Add missing antenna footprints, in use during layout design.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
4a307de515
|
Add LDO voltage regulator to step down from 5V (Host/USB) to 3V3.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
d46e563e62
|
Add ECC authentication secure element for imminent schematic capture.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
a71b05cc81
|
Prepare for layout edition in BGA with corresponding traces and vias.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
ff52db338c
|
Annotate symbols, correct power circuits, and assign footprints.
|
4 vuotta sitten |
|
Michael Schloh von Bennewitz
|
c2b37009ee
|
Add remaining circuits to almost complete minimum MCU application.
|
4 vuotta sitten |
