Design lacks a standard JTAG connector

Problem environment

The microcontroller flash storage can be programmed over the JTAG or SWD serial interface on the device. A connector allows for a particular cable to be used.

Steps to reproduce

Observe the layout and bill of materials
Examine the chip programming connector

Expected result

There should be one fast programming cable terminal and one common terminal.

Actual result

There is only a fast programming cable terminal, called Tag-Connect.

Severity level

This is low priority because project requirements specify no cable terminations.

Michael Schloh von Bennewitz ha añadido la etiqueta

enhancement

hace 4 años

Michael Schloh von Bennewitz ha añadido esto al hito Final schematic and layout design hace 4 años ' issues.change_milestone_at=`modificó el hito de %!s(MISSING) a %!s(MISSING) %!s(MISSING)

Michael Schloh von Bennewitz mencionada esta incidencia en un commit hace 4 años

Resolve #80 and #89 by adding a 1 uF decoupling capacitor and connector.

Resolved by 06ee3e4.

Michael Schloh von Bennewitz cerró hace 4 años

Inicie sesión para unirse a esta conversación.

#89 Design lacks a standard JTAG connector