Design lacks a standard JTAG connector

Problem environment

The microcontroller flash storage can be programmed over the JTAG or SWD serial interface on the device. A connector allows for a particular cable to be used.

Steps to reproduce

Observe the layout and bill of materials
Examine the chip programming connector

Expected result

There should be one fast programming cable terminal and one common terminal.

Actual result

There is only a fast programming cable terminal, called Tag-Connect.

Severity level

This is low priority because project requirements specify no cable terminations.

Michael Schloh von Bennewitz added the

enhancement

label 4 anni fa

Michael Schloh von Bennewitz aggiunta alle pietre miliari Final schematic and layout design 4 anni fa

Michael Schloh von Bennewitz ha fatto riferimento a questa issue dal commit 4 anni fa

Resolve #80 and #89 by adding a 1 uF decoupling capacitor and connector.

Resolved by 06ee3e4.

Michael Schloh von Bennewitz chiuso 4 anni fa

Effettua l'accesso per partecipare alla conversazione.

#89 Design lacks a standard JTAG connector