Design lacks a standard JTAG connector

Problem environment

The microcontroller flash storage can be programmed over the JTAG or SWD serial interface on the device. A connector allows for a particular cable to be used.

Steps to reproduce

Observe the layout and bill of materials
Examine the chip programming connector

Expected result

There should be one fast programming cable terminal and one common terminal.

Actual result

There is only a fast programming cable terminal, called Tag-Connect.

Severity level

This is low priority because project requirements specify no cable terminations.

Michael Schloh von Bennewitz 添加了标签

enhancement

在 4 年前

Michael Schloh von Bennewitz 4 年前添加了里程碑 Final schematic and layout design

Michael Schloh von Bennewitz 于 4 年前在代码提交中引用了该工单

Resolve #80 and #89 by adding a 1 uF decoupling capacitor and connector.

Resolved by 06ee3e4.

Michael Schloh von Bennewitz 于 4 年前关闭

登陆并参与到对话中。

#89 Design lacks a standard JTAG connector