Design lacks a standard JTAG connector

Problem environment

The microcontroller flash storage can be programmed over the JTAG or SWD serial interface on the device. A connector allows for a particular cable to be used.

Steps to reproduce

Observe the layout and bill of materials
Examine the chip programming connector

Expected result

There should be one fast programming cable terminal and one common terminal.

Actual result

There is only a fast programming cable terminal, called Tag-Connect.

Severity level

This is low priority because project requirements specify no cable terminations.

Michael Schloh von Bennewitz added the

enhancement

label 4 年之前

Michael Schloh von Bennewitz 新增至Final schematic and layout design 里程碑 4 年之前

Michael Schloh von Bennewitz 在代碼提交 4 年之前中引用了該問題

Resolve #80 and #89 by adding a 1 uF decoupling capacitor and connector.

Resolved by 06ee3e4.

Michael Schloh von Bennewitz 於 4 年之前關閉

登入才能加入這對話。

#89 Design lacks a standard JTAG connector