#89 Design lacks a standard JTAG connector

Fechado
aberto por Michael Schloh von Bennewitz 4 anos atrás · 1 comentários

Design lacks a standard JTAG connector

Problem environment

The microcontroller flash storage can be programmed over the JTAG or SWD serial interface on the device. A connector allows for a particular cable to be used.

Steps to reproduce

  1. Observe the layout and bill of materials
  2. Examine the chip programming connector

Expected result

There should be one fast programming cable terminal and one common terminal.

Actual result

There is only a fast programming cable terminal, called Tag-Connect.

Severity level

This is low priority because project requirements specify no cable terminations.

# Design lacks a standard JTAG connector ## Problem environment The microcontroller flash storage can be programmed over the JTAG or SWD serial interface on the device. A connector allows for a particular cable to be used. ## Steps to reproduce 1. Observe the layout and bill of materials 1. Examine the chip programming connector ## Expected result There should be one fast programming cable terminal and one common terminal. ## Actual result There is only a fast programming cable terminal, called Tag-Connect. ## Severity level This is **low priority** because project requirements specify no cable terminations.
Michael Schloh von Bennewitz adicionou a etiqueta
enhancement
4 anos atrás
Michael Schloh von Bennewitz adicionou esta issue para o marco Final schematic and layout design 4 anos atrás

Resolved by 06ee3e4.

Resolved by 06ee3e4.
Acesse para participar desta conversação.
Sem responsável
1 participante(s)
Data limite

Data limite não informada.

Dependências

Esta issue atualmente não tem dependências.

Carregando…
Cancelar
Salvar
Ainda não há conteúdo.